Friday, June 20, 2014

Running teks sederhana dengan Atmega 8

Asslamualaikum Wr Wb

sudah lama gak nulis di blog ini lg,,,
mumpung ada kesempatan nulis ,,,saya mau share project saya yang berhasil saya aplikasikan yaitu Running teks sederhana menggunakan at mega 8. Saya waktu itu harus bisa bikin running teks ini soalnya buat kejutan cewek saya yang lagi ultah,jd mau gak mau harus jadi project ini,,hehehehe "Buat motivasi dan akhirnya dia suka :D ",,,, ...langsung aja saya mulai dari awal ,,heheheh gak bisa bosa basi,,,,,,

1. Running teks 8x8 = 4 buah
dengan konfigurasi pin :


                 atau bisa bikin sendiri dengan led biasa dirangkai matrix,,tp rada ribet heheheh,,,

2. IC sheft register SN74HC595  = 4 buah

3. Transistor NPN 2n222a  = 8 buah
4. Atmega 8 = 1 buah
5. regulator 7805 = 1 buah
6. header cover 10 pin untuk pin downloader = 1 buah
7. resistor 1 k = 10 buah
9. xtal 12 Mhz
10. capacitor 22 pf
11. Catu daya ( bisa battrai kotak 9 v / adaptor diatas 5 v)


Skema Rangkaian menggunakan proteus dengan ATmega 8:




source code bahasa c Atmega 8 :


/*****************************************************
This program was produced by the
CodeWizardAVR V2.05.3 Standard
Automatic Program Generator
© Copyright 1998-2011 Pavel Haiduc, HP InfoTech s.r.l.
http://www.hpinfotech.com

Project :
Version :
Date    : 24/12/2013
Author  : PerTic@n
Company : If You Like This Software,Buy It
Comments:


Chip type               : ATmega8
Program type            : Application
AVR Core Clock frequency: 12,000000 MHz
Memory model            : Small
External RAM size       : 0
Data Stack size         : 256
*****************************************************/

#include <mega8.h> 
#include <delay.h>
#define data_hi PORTC.0=1
#define data_lo PORTC.0=0

int i,c,geser,ulang;

unsigned char v[]={
0,0,0,0,0,0,0,0,0,0,0,

127,32,16,32,127,0,              //W
48,74,74,74,124,0,               //a
126,16,8,8,112,0,                //h
38,72,72,72,62,0,              //y
62,64,64,32,126,0,           //u
48,72,72,72,126,0,          //d
126,0,                              //i
0,0,
127,8,8,8,127,0,//H
126,0,          //i
48,72,72,72,126,0,//d
48,74,74,74,124,0,//a
38,72,72,72,62,0,//y
48,74,74,74,124,0,//a
8,62,72,64,32,0,//t
0,0,0,0, 
14,31,62,124,62,31,14,0,0,0,0,0,//love

127,73,73,54,0,//B

60,82,82,82,92,0,//e
126,26,42,68,0,//R
8,62,72,64,32,0,//t
126,16,8,8,112,0,//h
48,74,74,74,124,0,//a

0,0,

38,73,73,73,50,0,//s
48,74,74,74,124,0,//a
126,26,42,68,0,//R
126,0, 0,0,         //i


127,9,25,41,70,0,//R
60,82,82,82,92,0,//e
36,74,74,82,36,0,//s
126,18,18,18,12,0,//p
48,74,74,74,124,0,//a
8,62,72,64,32,0,//t

126,0, 0,0,         //i

0,0,126,223,187,191,191,187,223,126,0,0,0,

127,9,9,1,0,
60,66,66,66,60,0,
126,26,42,68,0,//R
60,82,82,82,92,0,//e
30,32,64,32,30,0,
60,82,82,82,92,0,//e
126,26,42,68,0,//R
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,

/*60,82,82,82,92,0,//e
124,2,124,2,124,0,//m
60,66,66,60,0,//o
126,4,2,2,124,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,//n
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,

//0,14,17,34,68,34,17,14,0,0,0,love
60,82,82,82,92,0,//e
124,2,124,2,124,0,//m
60,66,66,60,0,//o
126,4,2,2,124,0,//n


127,73,73,73,65,0,//E
126,26,42,68,0,//R
60,82,82,82,92,0,//e
126,4,2,2,124,0,0,0,//n

14,31,62,124,62,31,14,0,0,0,//love

127,65,65,34,28,0,//D
60,82,82,82,92,0,//e

38,73,73,73,50,0,//s
38,72,72,72,62,0,0,0,0,0,0,0,0,0,00,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0//y
*/};


unsigned char D[]={

255,255,24,24,24,24,255,255,0,//H
252,254,51,51,51,51,254,252,0,//A
255,255,51,51,51,63,30,0,//P
255,255,51,51,51,63,30,0,//P
3,7,12,248,248,12,7,3,//Y
0,0,0,0,0,
255,255,153,153,153,153,255,118,0,
255,255,0, //I
255,255,27,27,59,123,207,142,0,//R
3,3,3,255,255,3,3,3,0,//T
255,255,24,24,24,24,255,255,0,//H
0,0,0,0,0,
255,255,195,195,195,195,126,60,0,
252,254,51,51,51,51,254,252,0,//A
3,7,12,248,248,12,7,3,//Y
0,0,0,0,0,
255,255,219,219,219,195,195,0,
255,255,6,12,12,6,255,255,0,
126,255,195,129,129,195,255,126,0,
255,255,14,28,56,112,255,255,0,0,0,0,0,
0,194,227,227,243,223,206,204,0,
0,102,195,219,219,255,110,0,0,
3,3,255,255,3,3,0,
255,255,12,12,252,248,0,




};

unsigned char U[]={
/*
0,0,0,70,73,73,73,73,49,0,//s
60,82,82,82,92,0,//e
126,64,64,0,//L
48,74,74,74,124,0,//a
124,2,124,2,124,0,//m
48,74,74,74,124,0,//a
8,62,72,64,32,0,0,0,0,//t

8,62,72,64,32,0,//t
126,0,          //i
48,72,72,72,126,0,//d
62,64,64,32,126,0,//u
126,26,42,68,0,//R
0,0,0,0,0,
0,8,28,62,127,28,28,28,28,//panah
28,28,28,28,28,28,28,0,0,
0,8,28,62,127,28,28,28,28,//panah
28,28,28,28,28,28,28,0,0,
0,8,28,62,127,28,28,28,28,//panah
28,28,28,28,28,28,28,0,0,
0,8,28,62,127,28,28,28,28,//panah
28,28,28,28,28,28,28,0,0,
0,8,28,62,127,28,28,28,28,//panah
28,28,28,28,28,28,28,0,0,
0,8,28,62,127,28,28,28,28,//panah
28,28,28,28,28,28,28,0,0,
0,8,28,62,127,28,28,28,28,//panah
28,28,28,28,28,28,28,0,0,*/

//8,12,10,127,8,0,//4
255,255,224,224,231,231,0,0,231,231,255,255,
0,0,0,0,
70,73,73,73,73,49,0,//s
60,82,82,82,92,0,//e
60,66,66,66,36,0,//c
60,66,66,60,0,//o
126,4,2,2,124,0,//n
48,72,72,72,126,0,// d

0,0,0,0,0,

62,64,60,64,62,0,//w
60,82,82,82,92,0,0,0,0,0,//e

126,4,2,2,124,0,//n
60,82,82,82,92,0,//e
30,32,64,32,30,0,//v
60,82,82,82,92,0,//e
126,26,42,68,0,0,0,0,0,//R

48,72,72,72,126,0,// d
126,0,          //i
60,82,82,82,92,0,0,0,0,//e

14,31,62,124,62,31,14,0,0,0,//love

38,73,73,73,50,0,//s
126,0,          //i
126,4,2,2,124,0,//n
60,66,66,66,36,0,//c
60,82,82,82,92,0,0,0,//e

34,65,73,73,54,0,//3
66,127,64,0,0,0,0,//1

127,65,65,34,28,0,//D
60,82,82,82,92,0,//e
38,73,73,73,50,0,0,0,0,//s

66,97,81,73,70,0,//2
62,65,65,65,62,0,//0
66,127,64,0,//1
66,127,64,0,0,0,//1
127,62,28,8,
127,62,28,8,
127,62,28,8,0,0,0,0,


38,72,72,72,62,0,//y
62,64,64,32,126,0,//u
48,72,72,72,126,0,//d
126,0,0,//i
64,0,0,

124,2,124,2,124,0,//m
62,64,64,32,126,0,//u
32,66,66,66,62,0,//j
48,74,74,74,124,0,//a
126,8,8,8,112,0,//h
126,0,//i
48,72,72,72,126,0,0,//d
64,0,0,

62,64,64,64,62,0,//u
60,66,66,66,36,0,//c
126,0,0,//i
64,0,0,


124,2,124,2,124,0,//m
48,74,74,74,124,0,//a
124,2,124,2,124,0,//m
48,74,74,74,124,0,//a
48,72,72,72,126,0,//d
0,0,0,0,
8,28,62,127,8,28,62,127,8,28,62,127,

};

void clock(){
PORTC.1=0;
PORTC.2=1;
PORTC.1=1;
PORTC.2=0;
delay_us(700);}

void cepet(){
PORTC.1=0;
PORTC.2=1;
PORTC.1=1;
PORTC.2=0;
delay_us(470);}


void satu(){

 for(geser=0;geser<320;geser++){//lama tampil

            for(ulang=0;ulang<2;ulang++){//speed
            for(i=0;i<32;i++)   //i=jumlah kolom dot matrik 1 kolom =7
                {
                c=i-(33-geser);
               
                PORTD=v[c];
                if(i==1)
                data_hi;
                else
                data_lo;
                clock();
                }
                }
                }  ;}
               
                 
 void dua(){ while(3){
 for(geser=0;geser<250;geser++){//lama tampil

            for(ulang=0;ulang<2;ulang++){//speed
            for(i=0;i<29;i++)   //i=jumlah kolom dot matrik 1 kolom =7
                {
                c=i-(29-geser);
               
                PORTD=D[c];
                if(i==1)
                data_hi;
                else
                data_lo;
                clock();
                }
                }
                }  ;} };
void main(void)
{

PORTB=0xff;
DDRB=0x00;


PORTC=0x00;
DDRC=0xff;

PORTD=0x00;
DDRD=0xff;




while (1)
      { if (PINB.0==0) {  satu();
                                    };
     
         if (PINB.1==0) {  dua();
                                    };
     
     
      }
}
saya juga berhasil membuat running teks dengan ATmega 16
hasil simulasi di proteus.......

source code running teks atmega 16 :

/*****************************************************
This program was produced by the
CodeWizardAVR V2.05.3 Standard
Automatic Program Generator
© Copyright 1998-2011 Pavel Haiduc, HP InfoTech s.r.l.
http://www.hpinfotech.com

Project :
Version :
Date    : 12/12/2013
Author  : PerTic@n
Company : If You Like This Software,Buy It
Comments:


Chip type               : ATmega16
Program type            : Application
AVR Core Clock frequency: 12,000000 MHz
Memory model            : Small
External RAM size       : 0
Data Stack size         : 256
*****************************************************/

#include <mega16.h>

#include <delay.h>
#define data_hi PORTB.0=1
#define data_lo PORTB.0=0

int i,c,geser,ulang;
unsigned char U[]={

255,255,224,224,231,231,0,0,231,231,255,255,
0,0,0,0,
70,73,73,73,73,49,0,//s
60,82,82,82,92,0,//e
60,66,66,66,36,0,//c
60,66,66,60,0,//o
126,4,2,2,124,0,//n
48,72,72,72,126,0,// d

0,0,0,0,0,

62,64,60,64,62,0,//w
60,82,82,82,92,0,0,0,0,0,//e

126,4,2,2,124,0,//n
60,82,82,82,92,0,//e
30,32,64,32,30,0,//v
60,82,82,82,92,0,//e
126,26,42,68,0,0,0,0,0,//R

48,72,72,72,126,0,// d
126,0,          //i
60,82,82,82,92,0,0,0,0,//e

14,31,62,124,62,31,14,0,0,0,//love

38,73,73,73,50,0,//s
126,0,          //i
126,4,2,2,124,0,//n
60,66,66,66,36,0,//c
60,82,82,82,92,0,0,0,//e

34,65,73,73,54,0,//3
66,127,64,0,0,0,0,//1

127,65,65,34,28,0,//D
60,82,82,82,92,0,//e
38,73,73,73,50,0,0,0,0,//s

66,97,81,73,70,0,//2
62,65,65,65,62,0,//0
66,127,64,0,//1
66,127,64,0,0,0,//1
127,62,28,8,
127,62,28,8,
127,62,28,8,0,0,0,0,


38,72,72,72,62,0,//y
62,64,64,32,126,0,//u
48,72,72,72,126,0,//d
126,0,0,//i
64,0,0,

124,2,124,2,124,0,//m
62,64,64,32,126,0,//u
32,66,66,66,62,0,//j
48,74,74,74,124,0,//a
126,8,8,8,112,0,//h
126,0,//i
48,72,72,72,126,0,0,//d
64,0,0,};

void clock(){
PORTC.1=0;
PORTC.2=1;
PORTC.1=1;
PORTC.2=0;
delay_us(500);}

void cepet(){
PORTB.1=0;
PORTB.2=1;
PORTB.1=1;
PORTB.2=0;
delay_us(470);}


void dua(){
while (2){
 for(geser=0;geser<400;geser++){//lama tampil
            for(ulang=0;ulang<2;ulang++){ //speed
            for(i=0;i<30;i++)   //i=jumlah kolom dot matrik 1 kolom =7
                {
                c=i-(30-geser);
               
                PORTA=~U[c];
                if(i==1)
                data_hi;
                else
                data_lo;
                cepet();
                }
                }
                ;};}
               };


void main(void)
{
// Declare your local variables here

// Input/Output Ports initialization
// Port A initialization
// Func7=Out Func6=Out Func5=Out Func4=Out Func3=Out Func2=Out Func1=Out Func0=Out
// State7=0 State6=0 State5=0 State4=0 State3=0 State2=0 State1=0 State0=0
PORTA=0x00;
DDRA=0xFF;

// Port B initialization
// Func7=Out Func6=Out Func5=Out Func4=Out Func3=Out Func2=Out Func1=Out Func0=Out
// State7=0 State6=0 State5=0 State4=0 State3=0 State2=0 State1=0 State0=0
PORTB=0x00;
DDRB=0xFF;

// Port C initialization
// Func7=In Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In
// State7=T State6=T State5=T State4=T State3=T State2=T State1=T State0=T
PORTC=0x00;
DDRC=0x00;

// Port D initialization
// Func7=In Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In
// State7=T State6=T State5=T State4=T State3=T State2=T State1=T State0=T
PORTD=0x00;
DDRD=0x00;

// Timer/Counter 0 initialization
// Clock source: System Clock
// Clock value: Timer 0 Stopped
// Mode: Normal top=0xFF
// OC0 output: Disconnected
TCCR0=0x00;
TCNT0=0x00;
OCR0=0x00;

// Timer/Counter 1 initialization
// Clock source: System Clock
// Clock value: Timer1 Stopped
// Mode: Normal top=0xFFFF
// OC1A output: Discon.
// OC1B output: Discon.
// Noise Canceler: Off
// Input Capture on Falling Edge
// Timer1 Overflow Interrupt: Off
// Input Capture Interrupt: Off
// Compare A Match Interrupt: Off
// Compare B Match Interrupt: Off
TCCR1A=0x00;
TCCR1B=0x00;
TCNT1H=0x00;
TCNT1L=0x00;
ICR1H=0x00;
ICR1L=0x00;
OCR1AH=0x00;
OCR1AL=0x00;
OCR1BH=0x00;
OCR1BL=0x00;

// Timer/Counter 2 initialization
// Clock source: System Clock
// Clock value: Timer2 Stopped
// Mode: Normal top=0xFF
// OC2 output: Disconnected
ASSR=0x00;
TCCR2=0x00;
TCNT2=0x00;
OCR2=0x00;

// External Interrupt(s) initialization
// INT0: Off
// INT1: Off
// INT2: Off
MCUCR=0x00;
MCUCSR=0x00;

// Timer(s)/Counter(s) Interrupt(s) initialization
TIMSK=0x00;

// USART initialization
// USART disabled
UCSRB=0x00;

// Analog Comparator initialization
// Analog Comparator: Off
// Analog Comparator Input Capture by Timer/Counter 1: Off
ACSR=0x80;
SFIOR=0x00;

// ADC initialization
// ADC disabled
ADCSRA=0x00;

// SPI initialization
// SPI disabled
SPCR=0x00;

// TWI initialization
// TWI disabled
TWCR=0x00;

while (1)
      {
      dua();

      }
}


bagi yang serius mencoba pasti bakal bisa,,,,,,,Alhamdulillah saya sudah membuktikannya,,,
videonya bisa dilihat di youtube http://www.youtube.com/watch?v=6qbZZC-4Ceo

Untuk merubah tampilan huruf yang keluar ,saya menggunakan aplikasi ecek ecek konverter milik seseorang yang dishare di internet jg,,,hehehe sama2 berbagi ......
 
bagi yang ingin file skema rangkaian dan source code bahasa c bisa kirim PM ke facebook saya " Wahyudi Hidayat " saya lulusan Universitas Muhammadiyah malang,,elektro .karena kalo email kadang suka eror ,,,....
smoga bermanfaat....

Wassalamualaikum Wr Wb

Posted by at

20 comments:

  1. UnknownJune 23, 2014 at 11:59 PM

    gan gimana klo mau nampilin huruf doang di dot matrix 5x7 tanpa berjalan..cuma nampilin doang..

    ReplyDelete
  2. wahyudi hidayatJune 24, 2014 at 4:03 AM

    wah kalo itu blm saya coba mas,,,,,mhon maaf
    masnya pakek ic shift register apa gak? atau langsung di sambung ke mikronya mas dot matriknya?

    ReplyDelete
  3. UnknownAugust 17, 2014 at 12:00 PM

    Mas wahyudi saya mau tanya rangkaian di ats pakai ic shift register type brp

    ReplyDelete
  4. UnknownAugust 19, 2014 at 9:58 PM

    Mas wahyudi saya mau tanyak q coba coding dari bapak.error di void clock nya.apanya yg salah mas ya.terima kasih senelumnya

    ReplyDelete
  5. UnknownAugust 25, 2014 at 8:23 PM

    terima kasih sebanyak banyaknya mas wahyudi dengan meluangkan waktu anda telah merespon dan membalas email saya

    ReplyDelete
  6. UnknownAugust 26, 2014 at 7:55 PM

    Mas wahyudi,saya mau tanyak gimana cara nulis koding huruf buat dot 5x7
    Sama huruf keluarnya terbalik.makasih sebelumnya

    ReplyDelete
  7. UnknownDecember 11, 2014 at 5:36 PM

    Mantap bos, thanks

    ReplyDelete
  8. UnknownDecember 19, 2014 at 4:12 PM

    @lukman,,,di 5x7 pakek ecek2 converter jg bisa,,,,kalo eror coba di tulis ulang jangan d copy paste n diliat ada coding yang kurang apa gak,,,makasi da mampir semua :D

    ReplyDelete
  9. UnknownFebruary 20, 2015 at 11:44 PM

    Mas wahyudi klo dibagian nya erorr itu apanya?

    ReplyDelete
  10. UnknownFebruary 20, 2015 at 11:50 PM

    Mas wahyudi dibagian erorr apanya tuh mas?

    ReplyDelete
  11. UnknownFebruary 20, 2015 at 11:51 PM

    Mas dbagian delay.h erorr?

    ReplyDelete
  12. wahyudi hidayatMay 24, 2015 at 5:21 AM

    @tajudin,,jangan copy paste langsung,,coba diketik ulang,,,trimks da mampir

    ReplyDelete
  13. UnknownJune 16, 2015 at 9:37 AM

    This comment has been removed by the author.

    ReplyDelete
  14. UnknownJune 16, 2015 at 9:37 AM

    met malem mas...
    Tolong share tutorial yang bisa nampilin jam sama running text kaya yang di atas..jadi selang seling gitu..pake atmega8 ato atmega16 bisa gak?
    pengn bikin nih..
    terimakassih salam kenal...

    ReplyDelete
  15. tubehOctober 2, 2015 at 7:04 PM

    This comment has been removed by the author.

    ReplyDelete
  16. Yudi MansopyanMarch 10, 2016 at 11:31 PM

    Yang atmega8 klo di lihat dari rangkaiannya PortB gak dipakai, tp kok di source kode ada peran PortB PortC dan PortD ?

    ReplyDelete
  17. UnknownOctober 20, 2016 at 5:57 PM

    Mas boleh minta scematicnya???

    ReplyDelete
  18. UnknownFebruary 1, 2017 at 3:05 AM

    Wes pernah gae

    ReplyDelete
  19. Wawan SempaqMay 27, 2017 at 9:59 AM

    This comment has been removed by the author.

    ReplyDelete
  20. UnknownDecember 2, 2019 at 2:32 AM

    Wah gan kok kodenya beda ya sama saya dulu praktek
    Kalau dulu saya pakai kode biner utk eksekusi programya

    ReplyDelete

Subscribe to: Post Comments (Atom)